Some new orders we are just about to dispatch, 1/5 scale and 1/4 scale P51 Exhaust stacks. 3D unpainted prints. Don't forget these are available ready painted on request!

Cary

All, we are thrilled to announce that "by chance" one of our products a 3D printed WW1 Spandau gun has been purchased by Shaun Garrity who advised us that he is a reviewer of products for the Radio Control Model and Electronics magazine. Shaun was actually building and reviewing the "Veron" kit of the Fokker DVIII and came across our website, he promptly ordered a set of Spandau's and has published his review in the May edition of RCM&E which is now available! We were not expecting this but are thrilled that he has briefly reviewed them and mentioned us in the magazine!

https://www.magazine.co.uk/magazines/rcme-magazine

Thankyou Shaun!

Cary

New product design complete. The Allison twin manifold to one exhaust stack used on the early P51 and the P39's! Measurements taken from actual stacks as shown in the photographs!

Cary

It's been a while folks but Bert and I have been busy developing the website, building and refurbishing our models and getting on with life! We agreed we maybe getting older but definitely not slowing down! Now that we have caught up with a few things we thought it's about time to bring you all upto speed with what we have been doing

The website is now filling up nicely and there are "oodels" of new products and of course the old favourites!

here are 2 of our latest developments:-

The Drop Down Landing Light

We also have a controller for the landing light which can control upto 2 landing lights & servos, with an adjustable On/Off setting for the light unit, plus it can also control 2 additional LED lights for use such as ID lights. The light lens is available in various diameters from 34mm.

We have developed our range of wheels that include 3D printed inserts for the following aircraft:-

P-51, T-6, P-38, Spitfire (3 or 4 spoke), early Spitfire Mk1/2

The wheels are a GRP rim and an alloy bearing hub designed to meet the demands of large scale models. The size range is from 5 to 7 inch

Bert and myself hope everybody is safe and well, working on their new creations or even having that "I will just do a little bit more" thing when you want to add more scale detail to your aircraft!

Please feel free to have a look at the website

www.carbercomposites.com

Thankyou

Cary

A favourite with the P-51 model builders is the wing gun port kits we developed a few years ago.

As we all know the gun ports at each wing position are slightly different because of each Browning gun being mounted slightly out of line with each other as shown below

Plus you can see that each gun port has a different gun barrel length (albeit these are mock ups of the real Browning on a P-51)

Here are our versions

These are available from our website or you can ask me a question right here on RCSB.

www.carbercomposites.com

Cary