RCSCALEBUILDER.COM - Hello from Spain

Home>Forums>Introduce Yourself>Hello from Spain

Post Reply New Topic

Forum Jump

Author / Post

	Diego Basic Member	Joined: November/25/2020 Spain Posts: 40 IP Logged
Posted: June/04/2021 at 2:02am		Quote

Hello,
I joined RCSB last year and have been reading and learning from the scalemasters in these forums. I have been building aircraft ever since I can remember, my parents probably suspected my addittion ever since I was a toddler and kept a supply of plastic and balsa kits coming that I diligently built. At 10 years old we moved from Madrid, Spain to Cincinnati, Ohio for three years (my dad worked for Procter and Gamble, which is headquartered there). Again, my dad managed to find a LHS (the Flight Box), purchased a Sig Kadet and 4ch Futaba and made us members of the Greater Cincinnati RC Club (GCRCC). I built the Kadet and remember as the happiest times when he would drive me after work to the GCRCC to take my RC flying lessons. This was when the club rented the land to a seminar, the club had a great runway and clubhouse and they taught me how to fly and many tips on building and adjusting models. For example, they told me to solder the kwik-links to the copper cable...I had glued it with epoxy...hey I was only 10... I progressed to a Sig Kavalier and CG Falcon 56...
Eventually we moved back to Spain, I studied aerospace engineering and worked for Rolls-Royce in Derby (UK) as a design engineer and now I am with Airbus in Madrid, as program manager for tanker aircraft.
Starting and raising a family took its toll on the hobby, but a few years back I decided to get back to the hobby and joined a local club in Madrid.
As all our spare rooms are occupied by children (four of them) I build on the dining room table, which means that I have to pick-up my bulding board for dinner every night. So due to time and space the complexity of the builds I tackle is limited, but the enjoyment is great.

I will start a buid thread shortly on my sport-scale project.

Below is a picture in Cincinnati (1981) with my Sig Kadet.

	Neil S Site Supporter	Joined: January/20/2012 New Zealand Posts: 1359 IP Logged
Posted: June/04/2021 at 2:17am		Quote

Welcome Diego,

You have found the right place to share your passion.

Neil

__________________
Flying:
Brian Taylor Spitfire MkIX
Top Flite P47 GS
1/4 MR Sopwith Pup

Building:
BT Mosquito PR XVI @ 1:6.5 scale

	mchandrayan Site Supporter	Joined: January/28/2007 India Posts: 710 IP Logged
Posted: June/04/2021 at 2:23am		Quote

Welcome Diego

	Sparky Lifetime Site Supporter Head Curmudgeon	Joined: February/10/2004 United States Posts: 7131 IP Logged
Posted: June/04/2021 at 8:01am		Quote

Diego,
Cincinnati was a great place back then. I don't know if the GCRCC field has moved but in 2-3 hours I'm driving over to the current GCRCC field to pylon race over this weekend.
Welcome to RCSB!
Sparky

__________________
Brown County, Indiana
TopRC FW-190, Zenoah GT-80
Bates F6F Hellcat, Saito FG60-R3
Gamma RIP

	Skyediamonds Site Supporter	Joined: April/03/2018 United States Posts: 2671 IP Logged
Posted: June/04/2021 at 12:48pm		Quote

Diego,
Welcome to the site. Glad to hear from you & know a bit about you. & your background. As time passes, you’ll get to know us as well.

Me? I was born 93% deaf in both ears. When I was young, my parents sent me to special schools where I picked up on sign language. I can speak orally but telephone conversations can be a challenge. Still, managed to graduate from college with a mathematics degree, but due to the severity of my hearing loss, was discriminated into driving trucks & big rigs for a living.

Despite these setbacks, against all odds I managed to fulfill a lifelong dream of flying & obtained a private pilot’s license with a multi engine rating & several other ratings & certificates as well.

Long story made short: I too have been modeling the whole time. There were breaks in between for raising a family & working. I’m now retired & currently in the process of super detailing a small Guillow’s P-51 for my daughter. Although she’s now a successful surgical nurse practitioner, she’s also a Mustang groupie.

I’m also an occasional resource for detailed photos of various aircraft.

Cheers,

Gary

	rc flyer 2 Lifetime Site Supporter	Joined: November/21/2018 United States Posts: 504 IP Logged
Posted: June/04/2021 at 1:09pm		Quote

Hi Diego!

What a great story you have and welcome to this great place where like-minded folks share their love for building and flying miniature aircraft. Look forward to your contributions on these pages soon.

__________________
Chris DeConti
Connecticut, USA

Central Connecticut R/C Club
Black Sheep Squadron

Current Project: TF 1/5 Scale P51D Mustang
Hanger: TF 1/5 Scale Corsair

Forum Jump

If you wish to post a reply to this topic you must first login
If you are not already registered you must first register

Post Reply New Topic

Similar topics you might be interested in...

Hello from SC

Hello from rip

Hello from Canada

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Portal Home Forum Icon

Forum Home Forum Icon

Your Privacy