RCSCALEBUILDER.COM - Byron kits

Home>Forums>Gossip>Byron kits

Post Reply New Topic

Forum Jump

2 Pages 1 2

Author / Post

	Planecrazy200 Site Supporter Scale Head	Joined: August/29/2010 United States Posts: 1443 IP Logged
Posted: March/22/2021 at 6:23pm		Quote

I read some where that the Byron line was purchased from Iron Bay and this person was going to re release in some form a few of the kits. Anyone know anything about this? Cant remember for the life of me where I read this and if it were true. Inquiring minds (and a small one at that) need to know.

__________________
Never made a mistake that a block of balsa or a sanding block couldn't fix!

Built...still counting! Let you know when I retire.
Building H421-C,YZero,FWTA-154
Next Up Macchi 202,R C500 enlg,125"

	Chris Kimball Lifetime Site Supporter	Joined: April/11/2007 United States Posts: 555 IP Logged
Posted: March/22/2021 at 7:14pm		Quote

If Iron Bay couldn't or wouldn't make it work out I wonder if anyone could . The old Byron equiptment, molds , etc.. are antiques by now , would it be salvageable ? Don't get me wrong I would love to see a Byron revival but at this point I wouldn't hold my breath waiting for it.

__________________
Gravity always wins !

Building: Newman Storch

	Planecrazy200 Site Supporter Scale Head	Joined: August/29/2010 United States Posts: 1443 IP Logged
Posted: March/22/2021 at 7:53pm		Quote

If the molds were taken care of they should be fine. Byron more then likely had the molds made out of only the best materials available at the time. I don't think you will ever see the whole (complete kit concept) back again but if at least they would make the main fiberglass components available and a little cad work to replace the foam with wood it should be doable. Iron Bay also has the molds to the Custom RC Aircraft line AKA George Millers kits which I also wish they would sell. These kits are perfect for the 120 size fans. I really dont understand why they would purchase these and sit on them for all these years and never tried to recoup their investment.

__________________
Never made a mistake that a block of balsa or a sanding block couldn't fix!

Built...still counting! Let you know when I retire.
Building H421-C,YZero,FWTA-154
Next Up Macchi 202,R C500 enlg,125"

	BobH Site Supporter	Joined: October/24/2003 United States Posts: 5911 IP Logged
Posted: March/22/2021 at 8:37pm		Quote

My guess is that Iron Bay discovered that there was more to the project than met their eyes. I seem to recall that they did sell some stuff? But not a lot of it. The inventory has mostly languished for a number of years. Probably never going to see a come back of the old Byron kits.

	boothg-3 Basic Member	Joined: August/23/2004 United States Posts: 232 IP Logged
Posted: March/22/2021 at 9:33pm		Quote

I searched the Internet a few years ago looking for iron bay and the T28
The only thing I found were bad things posted by modelers some claimed they lost their money one said he sent his sach,s in for repair and never saw it again
So beware and do your research
It looks like he would have sold the molds if the project was too much instead of them languishing somewhere

__________________
Gary

	Skyediamonds Site Supporter	Joined: April/03/2018 United States Posts: 2667 IP Logged
Posted: March/23/2021 at 9:29am		Quote

Gary,
Wise choice of words, couldn’t have said it better.

Gary (Skye)

	Chris Kimball Lifetime Site Supporter	Joined: April/11/2007 United States Posts: 555 IP Logged
Posted: March/23/2021 at 10:23am		Quote

The last excuses that I received from Iron Bay ,which was years ago , was that some of the molds were needing to be reworked and the Byrofoam processor needed parts . I was lead to believe that the foam wings were processed in some type of high pressure autoclave and it frequently broke down. I suspect the priority at Iron Bay was more aligned with the UAV side of their business and the much less profitable modeling part became an impediment to the flourishing AUV market .

__________________
Gravity always wins !

Building: Newman Storch

	Arngeir Blakseth Lifetime Site Supporter	Joined: October/02/2009 Norway Posts: 602 IP Logged
Posted: March/23/2021 at 11:17am		Quote

Here's a thread about the subject from another well known forum :

https://www.rcuniverse.com/forum/market/11688233

Forum Jump

2 Pages 1 2

Post Reply New Topic

Similar topics you might be interested in...

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Portal Home Forum Icon

Forum Home Forum Icon

Your Privacy