RCSCALEBUILDER.COM - New Scale Builder B17’s Projects

Home>Forums>Introduce Yourself>New Scale Builder B17’s Projects

Post Reply New Topic

Forum Jump

3 Pages 1 2 3

Author / Post

	sevarg Lifetime Site Supporter Passed Away 2016	Joined: December/16/2003 United States Posts: 4701 IP Logged
Posted: April/30/2013 at 7:44am		Quote

Quote: taguila

Is their a good thread to understand how the radio setup should be done on a plane like this?
Like how do I install the servo for each engine. is it all Y Harnesses?

With that 18 channel radio you just purchased, there will be no need for any Y harnesses. Each throttle servo can be assigned a different channel and then all mixed into the throttle channel so you have individual adjustments on each engine servo. Same for aileron, elevator, and flaps. I am not familiar with your radio but I would think you would have as a minimum dual channel functions on throttle, aileron, and elevator. Maybe you even have a 4 engine function. You will need to spend some time familiarizing your self with the available functions, and if you are lucky someone on this site will be familiar with the programming of the DX-18.

Massive projects you have undertaken. Good Luck!

__________________
Flying:
BUSA 1/3 Pup
GeeBee Sportster
Canadair 215 Water Bomber
BUSA 1/3 Nieuport 28
Thomas repair:1/4 Beech Starship
Repairing: 40% Cessna U3-B
Building:Kawasaki Ki-100 110"
NEXT:NorthropXB35

	DJMETT55 Basic Member Pilot	Joined: November/05/2018 United States Posts: 2 IP Logged
Posted: October/15/2019 at 9:59am		Quote

Hello from Tennessee, new 1/12th B17 94" wingspan , electric,stick built. Having a hard time with building the engine cowls, and all gun turrets, i want to vacuum form every thing or is there a easy way.Also i want to build a patriotic theme for colors any ideas! Also the cockpit canopy design?. Sorry i don't know how to post pictures of my build?.

__________________
Dave Mettetal

	Sparky Lifetime Site Supporter Head Curmudgeon	Joined: February/10/2004 United States Posts: 7131 IP Logged
Posted: October/15/2019 at 11:09am		Quote

Dave,
Welcome to the site you will have to join RCSB before you can post pictures. Also this is a dead thread so best to start your own build thread once you join. Look in the tutorials for clues on making the parts you seek. I believe the B-17 cowls are basically round so if you know the Dia of the cowls there are a lot of places to look (grocery store) to repurpose plastic lids or containers that will be quite affordable.
Sparky

__________________
Brown County, Indiana
TopRC FW-190, Zenoah GT-80
Bates F6F Hellcat, Saito FG60-R3
Gamma RIP

	DJMETT55 Basic Member Pilot	Joined: November/05/2018 United States Posts: 2 IP Logged
Posted: October/16/2019 at 8:45am		Quote

i just joined i still cant post pictures!

__________________
Dave Mettetal

	abufletcher Site Supporter	Joined: March/11/2004 United States Posts: 9562 IP Logged
Posted: October/16/2019 at 9:11am		Quote

The photos must be less than 175k and less than 1200 pixels on the longest side. Some members use a free resizing app called PhotoRazor.

https://photorazor.en.softonic.com/

	kuhn Site Supporter	Joined: February/08/2009 Bulgaria Posts: 2905 IP Logged
Posted: October/16/2019 at 9:24am		Quote

Quote: DJMETT55

i just joined i still cant post pictures!

Go here ... read EVERYTHING!

https://www.rcscalebuilder.com/faq.asp

__________________
Kuhn

If in doubt. Don't!
Flying: HIGH!
Building: Getting my Mo Jo back slowly to finish a few projects.

	Appowner Site Supporter	Joined: August/30/2010 United States Posts: 1473 IP Logged
Posted: October/16/2019 at 9:25am		Quote

Don't you also have to have a minimum of 10 posts before you can post pics?

	kuhn Site Supporter	Joined: February/08/2009 Bulgaria Posts: 2905 IP Logged
Posted: October/16/2019 at 9:58am		Quote

No.

Read the FAQ section.

All the info is there.

__________________
Kuhn

If in doubt. Don't!
Flying: HIGH!
Building: Getting my Mo Jo back slowly to finish a few projects.

Forum Jump

3 Pages 1 2 3

Post Reply New Topic

Similar topics you might be interested in...

New To ScaleBuilder site

Scale Builders & projects wanted

Palmer’s Bronco

Scale Builder Wanted

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Portal Home Forum Icon

Forum Home Forum Icon

Your Privacy