E-6000 is a very strong adhesive
I have used E-6000 and it's previous name "Goop" for years to attach Aileron and Flap servos on their side, to the Ply mounting plate. No screws at all.
Clamped in place and left overnight, the only way you can remove the Servo is to cut around the bead of adhesive with a sharp knife and then pry the servo off with a flat screwdriver blade or something similar. Any other way will just destroy the ply plate.
I am sure this will produce some criticism, but I have NEVER had one come loose.
It is far stronger than small screws into a Basswood or Spruce strip. JMTC.
__________________ Please engage Brain before operating tongue or machinery.
"Scale Detail equals Weight"
Alan
Woodway, TX
|