Back in 2009 I was producing a weight reduction kit for the SisT composite model. The molded fiberglass parts were heavy and forced the builder to add extra nose weight.
Lately I had a few inquiries for those kits again so I decided to produce a new batch.
These parts will also be part of the new 20% Fw190A model kit, and will fit other kits in the market.
When I looked at the files I noticed some parts could be improved, better fitting, more scale, etc. (it never ends) so I spend a couple of weeks re-doing the files and this is the kit what I came up with:
Kit List of Parts:
Flaps:
o
2 x F01 lower skins (fliteskin sheet #11)
o
2 x F04 Ply upper 1/64” (sheet #12)
o
2 x F02 Balsa spars (sheet #02)
o
26 x F03 Ribs (sheet #WR01)
o 2 x Leading edge bass stringers
1/8” x 1/8”
Ailerons:
o
2 x AS02 Ply lower skins (sheet #06)
o
2 x AS03 Ply upper skins 1/64” (sheet #12)
o
2 x AS01 spars (sheet #02)
o
56 A1 through A27 Ribs (sheet #03)
o 2 x triangle 18” L.E
o 2 x 1/8x1x18” balsa strip
o 2 x aluminum tubes 14.5”
o
2 x A28 Aileron balsa tips (sheet #WR03)
Elevators:
o
6 x EL3 A/B/C Elevator spars (sheet #WR02)
o
2 x E1 Ply skins (sheet #06)
o
2 x E1B Ply skins (sheet #06)
o
20 x Elev. Ribs (sheet #WR01)
o
6 x E11 Elevator Tips (sheet #WR03)
o
4 x E12 Elevator counter balance (sheet #WR03)
Rudder:
o
4 x Spars (R1A/B/C/D) (sheet #02)
o
7 x Rudder Ribs (sheet #WR01)
o
2 x Ply skins (R02R/R02L)
(sheet #06)
o
2 x R11A parts (sheet #02)
o
2 x R11B (sheet #02)
o
2 x R12B (sheet #WR03)
o
2 x R2 (sheet #WR03)
o
2 x R3 (sheet #WR03)
Cockpit:
o
8 parts (1 ply, 7 fliteskin) Head armor, cockpit hatch.
__________________
Fliteskin Aeroscale LLC
Salem Oregon
http://fliteskin.com/
|
![]](/skins/text/forum_images/header-bg.gif)
Portal Home
Forum Home
![]](/skins/text/forum_images/top-left.gif)
![]](/skins/text/forum_images/left-side-table-bg.gif)
![]](/skins/text/forum_images/right-side-table-bg.gif)
![]](/skins/text/forum_images/hide_min.gif)